3D Printers:Creality K1 Max: Difference between revisions

From Unallocated Space
Jump to navigation Jump to search
(Created page with "[http://k1max.uas.run Web Interface] == Specs == Type: CoreXY Extruder: Dual-gear Direct Drive Build Volume: 300x300x300mm Bed Type: Magnetic Spring Steel Hot End: Micro Swiss FlowTech Nozzle Diameters: 4mm, 6mm Nozzle Type: Micro Swiss Brass Plated Wear Resistant Filament Size: 1.75mm === Supported Filaments === *ABS *PLA *PETG *PET *TPU *PA *ABS *ASA *PC PLA-CF *PA-CF *PET-CF")
(No difference)

Revision as of 21:19, 12 May 2024

Web Interface

Specs

Type: CoreXY Extruder: Dual-gear Direct Drive Build Volume: 300x300x300mm Bed Type: Magnetic Spring Steel

Hot End: Micro Swiss FlowTech Nozzle Diameters: 4mm, 6mm Nozzle Type: Micro Swiss Brass Plated Wear Resistant

Filament Size: 1.75mm

Supported Filaments

  • ABS
  • PLA
  • PETG
  • PET
  • TPU
  • PA
  • ABS
  • ASA
  • PC PLA-CF
  • PA-CF
  • PET-CF
Retrieved from "https://www.wiki.unallocatedspace.org/wiki/index.php?title=3D_Printers:Creality_K1_Max&oldid=1340"