3D Printers:Lulzbot Taz 3: Difference between revisions
Jump to navigation
Jump to search
(Created page with "Was missing power supply. A new (low voltage) supply was purchased for it. We have a 360 volt but it originally used a 400v. The power cable and housing is also missing. Bowie has found the part numbers for the connectors.") |
(No difference)
|
Latest revision as of 07:38, 13 May 2024
Was missing power supply.
A new (low voltage) supply was purchased for it. We have a 360 volt but it originally used a 400v.
The power cable and housing is also missing. Bowie has found the part numbers for the connectors.