3d printer parts

Mechanical

Quantity	Item	Link	Note	Purchased
1	pane of glass 7 7/8"x 7-7/8"	None	None	No
1	Plastruder	[1]	1.75mm filament	No
83	5/16" Nuts	[2]	Stainless	No
93	5/16" Washers	[3]	Stainless	No
6	5/16" x 30 Fender Washers	unknown	Stainless	No
2	M4 x 20 Bolt	Link	Note	No
2	M4 Nut	Link	Note	No
2	M4 Washer	Link	Note	No
22	M3 x 10 Bolt	Link	Note	No
16	M3 x 25 Bolt	Link	Note	No
4	M3 x 40 Bolt	Link	Note	No
70	M3 Washer	Link	Note	No
40	M3 Nut	Link	Note	No
2	M3 Grub Screw	Link	Note	No
3	608 Roller Skate Bearing	[4]	Note	No
6	5/16" x 370mm Threaded Rod	Link	Note	No
4	5/16" x 294mm Threaded Rod	Link	Note	No
3	5/16" x 440mm Threaded Rod	Link	Note	No
2	5/16" x 210mm Threaded Rod	Link	Note	No
1	5/16" x 50mm Threaded Bolt	Link	Note	No
2	Everbilt 1/2 in. x 1-1/2 in. and 7/16 in. x 2-1/8 in. Zinc-Plated Compression Springs (4-Pack)	[5]	Needed for the threaded rods	No
2	8mm x 420mm Smooth Rod	Link	Note	No
4	8mm x 406mm Precision Rod	[6]	Note	No
2	8mm x 330 mm Precision Rod	[7]	Note	No
1	225mm x 225mm	Link	Steel	No
1	140mm x 225mm	Link	Steel	No
1	840mm x 5mm Belt	[8]	Rubber	No
1	900mm x 5mm Belt	[9]	Rubber	No
5	NEMA Bi-Polar Stepper Motor	[10]	Recommended by Midsouth Makers	No
50	Zip Ties	Link	Small	No
1	Maker Gear Plastruder	[11] - $170	Prusa Stepper Plastruder Kit (.35mm hybrid for 1.75mm filament)	No
2	Pully	[12]	Recommended by Midsouth Makers	No
1	Hobbled Bolt	[13]	Recommended by Midsouth Makers	No
1	Heated Bed	[14] $50.00	Recommended by Midsouth Makers	YES
1	RAMPS DIY Kit	[15] $162.00	Recommended by Midsouth Makers	YES