3D Printing

From Unallocated Space
Revision as of 22:03, 7 November 2011 by Hexjunkie (talk | contribs)
Jump to navigation Jump to search

Unallocated Space has acquired the parts to start building a 3D printer called a RepRap Prusa Mendel.

This bot will be a valuable addition to the space and can be used as a source of custom one off parts as well as fun odds and ends.

The 3D printing initiative will be headed up by Hexjunkie, please see him if you have any questions.


List of parts to purchase

Mechanical

Quantity Item Link Note Purchased
83 5/16" Nuts [1] Stainless No
93 5/16" Washers [2] Stainless No
6 5/16" x 30 Fender Washers unknown Stainless No
2 M4 x 20 Bolt Link Note No
2 M4 Nut Link Note No
2 M4 Washer Link Note No
22 M3 x 10 Bolt Link Note No
16 M3 x 25 Bolt Link Note No
4 M3 x 40 Bolt Link Note No
70 M3 Washer Link Note No
40 M3 Nut Link Note No
2 M3 Grub Screw Link Note No
3 608 Roller Skate Bearing [3] Note No
6 5/16" x 370mm Threaded Rod Link Note No
4 5/16" x 294mm Threaded Rod Link Note No
3 5/16" x 440mm Threaded Rod Link Note No
2 5/16" x 210mm Threaded Rod Link Note No
1 5/16" x 50mm Threaded Bolt Link Note No
2 Everbilt 1/2 in. x 1-1/2 in. and 7/16 in. x 2-1/8 in. Zinc-Plated Compression Springs (4-Pack) [4] Needed for the threaded rods No
2 8mm x 420mm Smooth Rod Link Note No
4 8mm x 406mm Precision Rod [5] Note No
2 8mm x 330 mm Precision Rod [6] Note No
1 225mm x 225mm Link Steel No
1 140mm x 225mm Link Steel No
1 840mm x 5mm Belt [7] Rubber No
1 900mm x 5mm Belt [8] Rubber No
5 NEMA Bi-Polar Stepper Motor [9] Recommended by Midsouth Makers No
50 Zip Ties Link Small No
1 Wade's Geared Extruder [10] Have Printed Parts, need electronics No
2 Pully [11] Recommended by Midsouth Makers No
1 Hobbled Bolt [12] Recommended by Midsouth Makers No

Electronic

Quantity Item Link Note Purchased
1 Heated Bed [13] $50.00 Recommended by Midsouth Makers No
1 RAMPS DIY Kit [14] $162.00 Recommended by Midsouth Makers No

Ideas in the works

Ongoing Projects